Patton Copperlink 2110 Ethernet Booster

Patton_2110_Ethernet_Booster

The Patton Copperlink 2110 Ethernet Booster is inserted in the middle of a copper run to extend Ethernet beyond its 100 meter limit.   The units come in 3 models, the 2110/EUI, the  2110/P  and  the 2110/PSE/EUI-48 .

The CopperLink™ Model 2110 doubles Ethernet distance limitations of 328 feet (100 meters). Multiple Model 2110 Ethernet Boosters can be placed in-line to further extend both Ethernet and PoE up to 1,640 ft (500 m), eliminating the need for additional switches, hubs, wireless access points, and expensive fiber installations. The Model 2110 is completely transparent to protocol making them true plug-and-play devices, completely interoperable with any network enabled device. The Model 2110 will not cause latency or degradation on your network connections, ensuring the maximum 100-Mbps full-duplex line rate. The Model 2110P and 2110PSE not only transparently pass on Ethernet data, but also feed on and forward PoE power to devices such as wireless access points, IP cameras, and VoIP phones.

2110/PSE/EUI-48  10/100 Mbps Ethernet Booster; 802.3af; Injector 56VDC Source

•      Extends the reach of Ethernet

•      Does not accept PoE

•      Provides large source of PoE power to remote devices or 2110/P’s

 2110/EUI 10/100 Mbps Ethernet Booster; 100-240 VAC

•             Extends the reach of Ethernet

•             Does not accept PoE or provide PoE

•             Powered by external AC or DC power supply

2110/P 10/100 Mbps Ethernet Booster; 802.3af pas through

•             Extends the reach of Ethernet

•             Accepts PoE.

•             Provides small amount of PoE power to remote devices or other 2110/P’s

Ethernet & PoE Extension—Doubles 10/100Base-TX Ethernet and PoE to 200 meters (656 feet). Multiple units can be used in series for even longer extensions.

Operates over CAT5—Reduces the cost and hassles of adding switches, hubs, and wireless access points.

Plug and Play—No configuration or cable hassles during installation with auto-sensing 10/100, full or half duplex, and automatic MDI-X.

Transparent LAN Operation—Transparent operation ensures the highest rate possible for each extension distance.

No External Power Required—Power over Ethernet (PoE) capability enables both extenders and peripheral devices to be powered over standard twisted-pair Ethernet cable.

Made in the USA

If you don’t mind inserting a device into the middle of long Ethernet cable run, these Ethernet Boosters will work.   If you’d rather put a device at each end, then you’ll want to consider our Ethernet Extenders.

For questions, more information or pricing

call 610-399-3911